The hzqjchain Leaf Chain manufacturer introduced in detail how should the chain guide rail lift be maintained ?:

1. Maintenance of engine oil. Before each use, check the engine oil level to see if it is in the middle of the upper and lower scales of the engine oil scale. After the new machine is used for 5 hours, the oil should be changed. After 10 hours of use, the oil should be changed again, and then the oil should be changed on time according to the instructions of the manual. The oil change should be performed while the initiator is in a hot condition. Do not add too much engine oil, otherwise it will appear difficult to launch, black smoke, lack of power, and overheating of the engine.

2. Chain guide rail guide type air filter core maintenance. Before and after each use, check whether the air filter element is dirty and change it frequently. If it is too dirty, it will cause the starter to be difficult to start, smoke will be large, and lack of power. If the filter element is paper, you can remove the filter element and wipe off the dust attached to it; if the filter element is sponge, you can use gasoline to clean it, and then drop some lubricant on the filter element properly to keep the filter element in a wet state Conducive to adsorption of dust.

3. The maintenance of the chain guide rail guide type radiator radiator, the main function of the radiator is noise reduction and heat dissipation. When the lawnmower is in operation, flying grass will adhere to the radiator, affecting its heat dissipation function. When it is severe, it will form a pulling cylinder and damage the initiator. Therefore, after each use, carefully clean the radiator. Sundries.

information about Leaf Chain : https://www.hzqjchain.com/product/leaf-chains/